Chimney Inspection By a Chimney Sweep

Chimney Inspection -CHIMNEYS.COMA Chimney Inspection is one of the most important services a chimney sweep offers; and, one of the most misunderstood. There are several reasons for which a chimney sweep is called to inspect a chimney or venting system:

  • The property is to be sold or bought and problems that might be missed during a general home inspection are a concern. This is not just a service for those planning the purchase of a home ~ many of our satisfied clients are homeowners in the process of selling their homes who wish to be aware of any potential problems which might delay the sale of their home.
  • There has been a problem with the chimney or venting system
  • The property owner recognizes that the chimney should be inspected yearly and cleaned if necessary.
  • There are many other reasons to perform a chimney inspection

What Is a Chimney Inspection?

 

The chimney sweep  is called to the property to perform a chimney inspection. But what does this really mean? What is the chimney sweep going to do? In the past, the understanding of what was entailed in a chimney “inspection” was not necessarily the same for the property owner and the chimney professional. Clearly, a mutual understanding was necessary but how would this come about?

No More Confusion about Chimney Inspections

 

Enter the Chimney Safety Institute of America (CSIA) and the National Fire Protection Association (NFPA). Working together, these organizations examined the issue and provided clear guidelines for a chimney inspection that would be acceptable to both the property owner and the chimney professional.

The standards that these organizations provide can be found in two publications:

  1. Successful Chimney Sweeping, published by the CSIA, (13-1 – 13-4)
  2. NFPA 211 Standard for Chimneys, Fireplaces, Vents, and Solid Fuel-Burning Appliances, published by the NFPA, (13.1 – 14.6.3.2)

Many chimney sweep companies have adopted these standards and offer information similar to that below to their clients to enable mutual understanding of the term “chimney inspection.”

Levels of Chimney Inspection

 

Chimney Inspections are now grouped into three levels: Level I, Level II, and Level III.

What makes one different from the other? Access. Access is the ability to see and inspect various areas of the chimney.

Level I Chimney Inspection

 

Access:

  1. Readily accessible portions of chimney exterior and interior.
  2. Accessible portions of appliance and chimney connection.

What the chimney sweep does:

  1. Examine the readily accessible portions of the chimney and venting systems
  2. Go on the roof to check for damage not visible from below.
  3. Certain conditions may prevent the chimney sweep from performing a rooftop chimney inspection: e.g., conditions prevent safe access.

What the chimney sweep looks for:

  1. Lack of obstruction or combustible deposits in the flue.
  2. Basic appliance installation and connection.

When is this done:

  1. During annual chimney inspection as required by Section 13.2 of NFPA 211.
  2. During routine cleaning of chimney flue.
  3. Upon direct replacement of a connected appliance with one of similar type, input rating, and efficiency.

Indications:

A Level I chimney inspection is indicated when verification of the suitability of the chimney for continued service, under the same conditions and with the same appliance or appliances, is needed.

Level II Chimney Inspection

 

Note: For real estate chimney inspections this is the level of inspection that MUST be performed in accordance with the National Fire Protection Association standards.

Access:

  1. Includes all accessible portions of the chimney exterior and interior.
  2. Including areas within accessible attics, crawl spaces, and basements.
  3. Accessible portions of the appliance and chimney connection. Shall include chimney inspection by video scanning or other means of inspection.

What the chimney sweep does:

  1. Examine the readily accessible portions of the chimney and venting systems
  2. Chimney exterior is inspected
  3. All accessible areas of the chimney are inspected: attics, basements, and crawl spaces.
  4. Chimney interior is inspected with a video camera.
  5. Go on the roof to check for damage not visible from below.
  6. Certain conditions may prevent the chimney sweep from performing a rooftop chimney inspection: e.g., conditions prevent safe access.

What the chimney sweep looks for:

  1. Lack of obstruction or combustible deposits in the flue.
  2. Basic appliance installation and connection.
  3. Proper construction and condition of accessible portions of the chimney structure and all enclosed flues.
  4. Proper clearances from combustibles in accessible locations.
  5. Size and suitability of flues for connected appliances

When is this done:

  1. Upon addition or removal of one or more connected appliances.
  2. Replacement of an appliance with one of dissimilar type in input rating or efficiency.
  3. Prior to relining or replacement of flue lining.
  4. Upon sale or transfer of the property.
  5. After an operating malfunction or external event likely to have caused damage to the chimney.

Indications:

  1. When verification of the suitability of the chimney for new or changed conditions of service needed.
  2. When a Level I chimney inspection is not sufficient to determine the serviceability of the chimney.

Level III Chimney Inspection

 

Note: information about Level III chimney inspections is presented in order to show all the levels of possible inspection. As can be seen from the level of accessibility mentioned below, Level III inspections are necessary only under severe circumstances. Many chimney sweep companies do not perform Level III inspections since this level of inspection calls for the near destruction of the chimney!

Access:

  1. Include external and internal portions of the chimney structure
  2. Including concealed areas of the building or chimney.
  3. Shall include removal of components of the building or chimney where necessary.
  4. Removal of such components shall be required only as necessary to gain access to areas that are the subject of the inspection.
~ Oliver Beauchemin, Accolade Group of VT, LLC

~ Asking for Chimney Information ~

After reading an article, you can ask a question about that article. Replies will come from Chimney Professionals, and sometimes from homeowners, who are giving their answer based on the information you provide. Remember that they are providing answers SIGHT and SITE unseen! 

CHIMNEYS.COM recommends that you use these comments to better inform yourself to discuss your chimney and venting issues with a professional whom you call to your home to evaluate the issue.

To read more like the article above, click on the topic below...

0 0 votes
Total
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments

Looking for a Chimney Sweep?

Click to find…

Your Chimney Pro

Scroll to Top